Customized product is available, Make your ideas into reality.

WhatsApp: 0086 13143416851 info@vena-led.com

Vena-led.com

T-1000S off-line LED controller

Compatible with wide range of addressable LED chipsets: 

  • TM1803/TM1804/TM1809/TM1812/TM1825/TM1826/TM1829/TA9909/TA9912
  • UCS1903/UCS1912/UCS2903/UCS2909/UCS2912/UCS3903/UCS3912/UCS8903/UCS8904
  • LPD6803/LPD1886/LPD1882/LPD1889/LPD6812/LPD6813/LPD8806/LPD8809
  • SM16716/SM16726/SM16711/SM16703
  • WS2811/WS2801/WS2803/WS2812B
  • LX1003/LX2003/LX2006
  • INK1003/INK1009
  • P9813/P9816/D705
  • APA102, APA12C
  • TLS3001/TLS3008/TLS3100
Online Message

Welcome to the online message!
Please fill in your contact information and suggestions! Thank you!

  • PRODUCT DETAIL

K-1000C System features

  •  1, 32 to 65536 degree Gray control, Gamma correction procession handle.
  • 2, Support various point, line light source, and all kinds of rules and specific shaped handle.
  • 3. The controller has one output port, can support up to 512/2048 pixels(DMX lighting support up to 512  pixels).
  • 4, Play content stored in the SD card , the SD card can store up to 32 effects File, SD card capacity support 128MB-32GB.
  • 5, The controller can single set use,also multiple controllers cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters, need to use 0.5M² pure copper power cord.
  • 6, The controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support IC through the controller CHIP button, this scheme is more flexible and convenient.
  • 7, For the DMX lighting IC, the controller comes with write address function; In addition, with use of our 2016 LedEdit-K V3.26 or later edition can make one key write address function setting.
  • 8, Support load lamp is 4 channels (RGBW) pixels, or split into single channel point pixels.
  • 9, Enhanced 485 TTL and 485 differential (DMX) signal output.
  • 10, The controller comes with the test effects were as follows: 1 red, green, blue and black jump; 2 red, green, blue and black gradient; 3 red, green, blue and goes.

Data sheet :

Productt name     SD Card K1000C Led Controller for Led Pixel Light, Led Module ,led Strip
Working voltage    Runs at DC 7.5-24V using an on board voltage regulator;   Or can be run off a single DC 5V source if you’re   running DC 5V led pixel digital srings/ strips
Control led pixels quantity    Drive up to 2048 pixels maximum using 256 brightness levels per color (24 bit color)
Support led pixel effects   Supports all the various rules-shape, special shape processing
Programs quantity   Off-line use can support 16 programmes stored in the SD card
software   LedEdit2014 / Glediator
Multiple programs name form   00_1.led,  01_1.led,  02_1.led,  03_1.led, etc
Choose programs speed / model   Using buttons on the controller, you can adjust the playback speed and choose the display program. Achieve to save the play list functions
Support our led products   LED pixle lights like 12mm led rgb pixel lights, 26mm 1903 pixel leds, etc;    LED digital strips like ws2801, ws2812b, ws2811, apa102 rgb pixel digital strips, etc;  LED digital modules like ws2801 ,lpd6803 rgb digital modules, etc;

Our Advantage

GLOBAL BUSINESS

We offer our customers from around the world to maintain a very good communication and product support services.

CUSTOMIZED

Customized product is also available, we can make your ideas into reality

GOAL

We devotes to LED Light products and LED project solutions